Home  |  Product Categories  |  Manufacturers  |  Product Search  |  About Us  |  How to Order

Replacement Door Pin and Bushing Package

• To alleviate the high cost of replacing door pins and bushings with complete hinge assemblies, we have devised a quick and effective way to cure the problem.
• No more drilling.
• No more bodywork.
• No more big parts bills.
• No more big labor bills.
• 1 Kit does either upper or lower hinge, passenger or driver side.
• Please see our other selection of Door Pins and Door Pin Kits
• Please see our Application Chart for Door Pins and Bushings
• NEW - Now available, part # 99RD for the rear doors of the extended cab pickup.
   

1. Remove door from body (Refer to appropriate service manual)
2. Grind/cut off two peaned pins at the peaned end.
3. Use a punch to remove the remaining pin.
4. Remove old bushings.

1. Install the brass bushings into the two hinge holes.  Both holes are the same diameter.
2. Install the longer of the two pins into the top hinge hole and through the "U" bracket.
3. Thread on the locknut so that the threads are started but do not tighten.
4. Install the shorter of the two pins through the "U" bracket and into the bottom hinge hole.
5. Install the supplied washer over the threaded portion of the bottom pin.
6. Thread on the locknut so that the threads are started but do not tighten.
7. Using a hand held wrench, completely tighten both nuts.
8. Replace the door to the body. (Refer to the appropriate service manual.)

For additional instructions and a diagram, please see the instruction sheet.

Service Information Communication Template

NEW - Now available, part # 99RD for the
rear doors of the extended cab pickup.

• Consumers & Garages
  • No Retail Sales
  • Price and Availability Inquiry for Consumers and Garages, so we can help you find a dealer near you.

Designed, manufactured and distributed by Ken-Co Industries

Home  |  Product Categories  |  Manufacturers  |  Product Search  |  About Us  |  How to Order